Comparison of organic cereal varieties - trial synthesis, triticale, spelt, winter barley, spring wheat, durum wheat, 2019

This tool is a synthesis of variety observations conducted all over France on triticale, spelt, winter barley, spring wheat, durum wheat in organic conditions. It is designed to help farmers to choose varieties that are adapted to organic conditions. The results are gathered and presented species by species and provide a wide range of observed characteristics

1-d gravity in infinite point distributions

The dynamics of infinite, asymptotically uniform, distributions of self-gravitating particles in one spatial dimension provides a simple toy model for the analogous three dimensional problem. We focus here on a limitation of such models as treated so far in the literature: the force, as it has been specified, is well defined in infinite point distributions only if there is a centre of symmetry (i.e. the definition requires explicitly the breaking of statistical translational invariance). The problem arises because naive background subtraction (due to expansion, or by "Jeans' swindle" for the static case), applied as in three dimensions, leaves an unregulated contribution to the force due to surface mass fluctuations. Following a discussion by Kiessling, we show that the problem may be resolved by defining the force in infinite point distributions as the limit of an exponentially screened pair interaction. We show that this prescription gives a well defined (finite) force acting on particles in a class of perturbed infinite lattices, which are the point processes relevant to cosmological N-body simulations. For identical particles the dynamics of the simplest toy model is equivalent to that of an infinite set of points with inverted harmonic oscillator potentials which bounce elastically when they collide. We discuss previous results in the literature, and present new results for the specific case of this simplest (static) model starting from "shuffled lattice" initial conditions. These show qualitative properties (notably its "self-similarity") of the evolution very similar to those in the analogous simulations in three dimensions, which in turn resemble those in the expanding universe.Comment: 20 pages, 8 figures, small changes (section II shortened, added discussion in section IV), matches final version to appear in PR

Real-time backstepping control for fuel cell vehicle using supercapacitors

A key issue of real-time applications is ensuring the operation by taking into account the stability constraints. For multisource vehicles, stability is impacted by the multisource interactions. Backstepping control ensures stable control for most classes of nonlinear systems. Nevertheless, no backstepping control in real time has been yet proposed for multisource vehicles. The objective of this paper is to apply the backstepping control to a multisource vehicle with fuel cell and supercapacitors for real-time implementation. A distribution criterion is used to allocate energy between sources. Experimental results demonstrate that the developed backstepping control can be implemented in real-time conditions. The supercapacitors can thus help the fuel cell to meet the requirements of the load with a guarantee of system stability. © 1967-2012 IEEE

Application of Object-Based Industrial Controls for Cryogenics

The first application of the CERN Unified Industrial Control system (UNICOS) has been developed for the 1.8 K refrigerator at point 1.8 in mid-2001. This paper presents the engineering methods used for application development, in order to reach the objectives of maintainability and reusability, in the context of a development done by an external consortium of engineering firms. It will also review the lessons learned during this first development and the improvements planned for the next applications

Effect of plasma density on diffusion rates due to wave particle interactions with chorus and plasmaspheric hiss: extreme event analysis

Wave particle interactions play an important role in controlling the dynamics of the radiation belts. The purpose of this study is to estimate how variations in the plasma density can affect diffusion rates resulting from interactions between chorus waves and plasmaspheric hiss with energetic particles and the resulting evolution of the energetic electron population. We perform a statistical analysis of the electron density derived from the plasma wave experiment on the CRRES satellite for two magnetic local time sectors corresponding to near midnight and near noon. We present the cumulative probability distribution of the electron plasma density for three levels of magnetic activity as measured by Kp. The largest densities are seen near L* = 2.5 while the smallest occur near L* = 6. The broadest distribution, corresponding to the greatest variability, occurs near L* = 4. We calculate diffusion coefficients for plasmaspheric hiss and whistler mode chorus for extreme values of the electron density and estimate the effects on the radiation belts using the Salammbô model. At L* = 4 and L* = 6, in the low density case, using the density from the 5th percentile of the cumulative distribution function, electron energy diffusion by chorus waves is strongest at 2 MeV and increases the flux by up to 3 orders of magnitude over a period of 24 h. In contrast, in the high density case, using the density from the 95th percentile, there is little acceleration at energies above 800 keV at L* = 6, and virtually no acceleration at L* = 4. In this case the strongest energy diffusion occurs at lower energies around 400 keV where the flux at L* = 6 increases 3 orders of magnitude

Gaps analysis and requirements specification for the evolution of Copernicus system for polar regions monitoring: addressing the challenges in the horizon 2020-2030

This work was developed as part of the European H2020 ONION (Operational Network of Individual Observation Nodes) project, aiming at identifying the technological opportunity areas to complement the Copernicus space infrastructure in the horizon 2020–2030 for polar region monitoring. The European Earth Observation (EO) infrastructure is assessed through of comprehensive end-user need and data gap analysis. This review was based on the top 10 use cases, identifying 20 measurements with gaps and 13 potential EO technologies to cover the identified gaps. It was found that the top priority is the observation of polar regions to support sustainable and safe commercial activities and the preservation of the environment. Additionally, an analysis of the technological limitations based on measurement requirements was performed. Finally, this analysis was used for the basis of the architecture design of a potential polar mission.Peer ReviewedPostprint (published version

Flux-based ozone risk assessment for a plant injury index (pii) in three european cool-temperate deciduous tree species

This study investigated visible foliar ozone (O3) injury in three deciduous tree species with different growth patterns (indeterminate, Alnus glutinosa (L.) Gaertn.; intermediate, Sorbus aucuparia L.; and determinate, Vaccinium myrtillus L.) from May to August 2018. Ozone effects on the timing of injury onset and a plant injury index (PII) were investigated using two O3 indices, i.e., AOT40 (accumulative O3 exposure over 40 ppb during daylight hours) and PODY (phytotoxic O3 dose above a flux threshold of Y nmol m−2 s−1). A new parameterization for PODY estimation was developed for each species. Measurements were carried out in an O3 free-air controlled exposure (FACE) experiment with three levels of O3 treatment (ambient, AA; 1.5 × AA; and 2.0 × AA). Injury onset was found in May at 2.0 × AA in all three species and the timing of the onset was determined by the amount of stomatal O3 uptake. It required 4.0 mmol m−2 POD0 and 5.5 to 9.0 ppm·h AOT40. As a result, A. glutinosa with high stomatal conductance (gs) showed the earliest emergence of O3 visible injury among the three species. After the onset, O3 visible injury expanded to the plant level as confirmed by increased PII values. In A. glutinosa with indeterminate growth pattern, a new leaf formation alleviated the expansion of O3 visible injury at the plant level. V. myrtillus showed a dramatic increase of PII from June to July due to higher sensitivity to O3 in its flowering and fruiting stage. Ozone impacts on PII were better explained by the flux-based index, PODY, as compared with the exposure-based index, AOT40. The critical levels (CLs) corresponding to PII = 5 were 8.1 mmol m−2 POD7 in A. glutinosa, 22 mmol m−2 POD0 in S. aucuparia, and 5.8 mmol m−2 POD1 in V. myrtillus. The results highlight that the CLs for PII are species-specific. Establishing species-specific O3 flux-effect relationships should be key for a quantitative O3 risk assessment

Mise en place d’une méthodologie d’identification et d’analyse des stérols oxygénés présents dans les kystes radiculo-dentaires

Our work has two main aims: to identify oxygenated sterols that accompany cholesterol in dental cyst and to develop effective methods for «profile» analyses of these sterols. Attention as focused on a family of products derived from cholesterol, characterized by the presence of one or more oxygenated functions.More than fifty of these oxysterols are known and find most of time in differents parts of the body. In the procedure, lipids are isolated from dental cyst, the fraction is trimethylsilylated and analysed by capillary gas chromatography. Sterols are identified by comparison with reference compounds. However, two sterols of particular interest, viz cholesterol α and β epoxides, are so easily produced from cholesterol (even when rigorous precautions are taken) that indirect methods of analysis are strongly advisable. An adequate degree of quantification is possible for sterols such as 26-Hydroxycholesterol (26OHCL), which do not arise significantly as artefacts. Even to verify the fraction which seems to be 26OHCL we used thin layer chromatography coupled with mass spectrometer.La présence de cristaux de cholestérol dans la majorité des kystes radiculo-dentaires (KRD) permet de penser qu’ils s’accompagnent d’oxystérols (OS). Ces substances agissent sur de nombreux mécanismes biologiques tels: la régulation physiologique du cholestérol, la multiplication cellulaire ou le métabolisme de l’acide arachidonique. Notre travail a pour but de mettre au point une technique de mise en évidence et de dosage des OS au sein des KRD. Les techniques utilisées sont des techniques de chromatographie en phase vapeur et de spectrométrie de masse. Cinq oxystérols sont isolés: 7OXO, 7βOH, 26OHCL, triol et époxydes α et β. L’activité biologique de certains de ces oxystérols semble favoriser le développement des kystes radiculo-dentaires, alors que d’autres semblent limiter leur extension